Record any Electrical Waveform on up to 32 Channels
Provides both functions of FFT analysis and octave,1/3 octave, 1/12 octave band analysis.
- Up to 32 channels are supported by using two SA-02M units.
- Allows high frequency analysis in multiple channels
- Direct sensor connection (TEDS compliant)
- Easy operation
- Standard software is supplied with the unit.
(Sensors and PC: option)
- Various additional analysis software available
Functions
The products consist of the hardware (main unit) comprising the input section and signal
processing section, and dedicated software (optional) to be installed on a generic computer.
The main unit and the computer are connected via an Ethernet link.
The main unit is equipped with a DSP chip for high-speed signal processing, which allows
not only FFT analysis but also multi-channel 1/N octave band analysis in real time.
Simultaneous FFT analysis and 1/N octave band analysis are also possible.
Time waveform data can be stored in the memory of the computer, offering the capability
to perform more detailed offline analysis later.
An optional signal output unit can be installed, for measurement scenarios where an output
signal is required. An input for a rotary pulse signal is also available, with optional
software that allows tracking analysis.
Software SA-02 BASE
The computer software SA-02 BASE is a dedicated software application (option) for the
Multi-Channel Signal Analyzer SA-02 series.
The software works by sending commands to the hardware. It can be used to control signal
processing, perform setup, collect data after signal processing, perform FFT analysis, carry
out further processing of analysis results, display data, and more. The software supports both the SA-02M and the SA-02A4.
The software has the following features.
-
Real-time FFT analysis and 1/N octave band analysis
The software can carry out FFT analysis, 1/1 octave band analysis, 1/3 octave band
analysis, or 1/12 octave band analysis in real time.
-
Time waveform data recording and playback for offline analysis
Time waveform data can be recorded (in internal memory and stored as data files).
While playing back recorded data later, FFT and 1/N octave band analysis can be
carried out simultaneously.
-
Simultaneous multi-channel analysis, up to 32 signal channels can be analyzed simultaneously
-
Various processing functions
Average processing and maximum value processing can be carried out. During
FFT analysis, transfer function, auto-correlation, cross-correlation, amplitude probability
density and other functions are available. During 1/N octave band analysis,
frequency weighting of analysis results is possible.
-
Data file management
Analysis results can be saved as data files, and saved files can be loaded again
later
-
Automated measurement using trigger signals
Measurement, recording, analysis, processing, auto store and other functions can
be started automatically using a trigger.